titanium rod in the pollution produced during thermal processing

Titanium in the heating, with the results of the interaction of oxygen, the oxide film formed on the surface. Heating at different temperatures, the structure and properties of the oxide film is different.titanium standard parts Below 538 ℃, the titanium oxide parabolic law. However, when more than 800 ℃, the oxide film to be decomposed, oxygen atoms between the oxide film will be converted into the metal lattice layer,titanium axle the oxygen content of titanium is increased. The oxide film is thickened. At this point there is no protective effect of the oxide film. Heating of industrial pure titanium oxide film thickness after half an hour in the air is gradually increased. Under the oxide film layer of a polluted gas element.titanium wire Increasing the temperature increases with the depth of the contaminated layer is heated and the heating atmosphere is affected. Titanium (with TC4 column) in carbon pollution layer silicon rods furnace heating temperature increases with the depth and deepened.

Medical grade titanium features

Medical grade titanium surface oxide film is the equivalent of a good durable wear with fat separating agents,titanium grade 2 sheet the use of titanium plates saving seed separating agent, so that the plate peeling easier, eliminating the pre-treatment process kinds plate, titanium plate than seed copper kinds plate to light half. Medical grade titanium is more than three times the life of the copper seed plates, depending on the operating conditions of up to 10 to 20 years. . Titanium kinds of copper plate preparation dense crystalline structure, smooth surface, good quality. Because titanium plate without smearing kinds separating agent,seamless titanium tube and thus avoid contamination copper electrolyte.
Medical grade titanium can increase capacity to reduce copper production costs, which have better economic benefits.

titanium plate manufacturing process

Forging: Forging process in metal recrystallization temperature or higher.
Hot rolling: titanium bar for sale  In the above the recrystallization temperature for the rolling process.
Cold rolled: plastic deformation temperature is below the temperature of the rolling process replies.
Annealing: the metal is slowly heated to a temperature sufficient to keep time, and then cooling at a suitable rate (slow cooling typically is sometimes controlled cooling) the heat treatment process of a metal.
Pickling: The article is immersed in an aqueous solution of sulfuric acid or the like to remove an oxide film such as a metal surface.Titanium tube supplier Is a pre-treatment or intermediate processing plating, enamel, rolling and other processes.